Intel Pentium M Box PC Manual do Utilizador

EX-98211 Fanless Intel Celeron/Pentium M Box PC Quick Installation Guide Version 1.0

CFD1: Compact Flash Disk (Share IDE1) Connector type: 50-pin compact flash type I/II LPT1: Parallel Port Connector Connector type: D-Sub 25-pin f

LAN1/LAN2 Connector (USB Port 1, 2 ~ USB Port 3, 4) Connector: This connector supports USB 2.0 x 4. Type: USB 2.0 x 4 USB1 Connector (USB Port 5

CN1: (COM1~4 +GPIO 2 In/2 Out Option RS422/485 output) IR1: Infrared (IR) Connector KBM1: PS/2 Keyboard & Mouse Connector type: external 6-

RS-422/485, GPIO Function Jumper Chapter 3 Maintenance Hardware Installation The EX-98211 is designed to be modular, slim and lightweight for easie

3. The processor socket comes with a screw to secure the CPU. As showing in the picture bellow, loose the screw first before inserting the CPU

3.3 Installing Memory Module 1. Locate the 240-pin LONG DIMM sockets. 2. Align the LONG DIMM on the socket and let the notch on the LONG DIMM meet t

3. Remove the Thermal Lump of South Bridge. 4. To install a Compact Flash Memory Card into the Main Board, align the notch on the card with the Comp

3.6 Installing Hard Disk Drive 1. Upside down the Box PC. Remove the Bottom Cover. 2. Locate the 4 screws on the HDD Holder Bracket. 3. Use screw

5. Connect the SATA cable between the HDD and the Main Board. 3.7 Installing Riser Card 1. Insert PCI card into the PCI slot. 2. Locate the screw

3.8 Installing Wall-mount Bracket 1. Upside down the Box PC. Please locate the 8 screw holes on the bottom cover. 2. Match the screws on the wall-mo

Chapter1 1 General Information 1.1 Introduction The EX-98211 Box PC is targeted at many different application fields. By adopting it, you can pin

1.2 Packing List After opening the package, carefully inspect the contents. If any of items is missing or appears damaged, please contact with your

1.4 Power Information 1.5 I/O Ports Arrangement The EX-98211 has 4 serial ports, 6 USB (Host) ports, and 2 RJ-45 LAN ports. The arrangement of th

1.6 Dimensions ‧ Dimension (W x H x D): 195 x 268 x 80 mm (7.68" x 10.55" x 3.15") Figure 1.3: Dimensions Chapter2 The Engine of

Figure 2.2: EX-98211 Main Board Bottom View 2.2 Jumpers and Connectors EX-98211 Main Board Jumper Setting

EX-98211 Main Board Connector Setting

JRS1 RS-232/422/485 Selection JP1 LAN LED Connector

IDE1: Primary IDE Connector Connector type: One onboard 44-pin box headers, primary IDE