Intel MPRTM4808 Manual do Utilizador descarregar pdf (Página 17)

Intel

NetStructure™ MPRTM4808 Rear Transition Board Installation Guide 17

Installation

3.4 Switch Settings

Caution: The Intel MPRTM4808 board provides two on-board switches and one FP reset switch. The

switches must be set to OFF to avoid damage to attached PMC modules.

3.5 Installing and Removing the Board

Caution:

• To prevent board damange, install and use the Intel MPRTM4808 board only with CPU boards

especially designed for it.

• Always turn off system power before installation or removal of the Intel MPRTM4808 board.

• Use only the backplane’s rear slot position.

Figure 10. Location of Switches

Table 3. Switch Settings

Switch No. Description

SW2

ON: Reset disabled

OFF: RESET enabled(default)

2 Reserved, must be OFF (default)

SW3

ON: Flash disk is master

OFF: Flash disk is slave (default)

2 Reserved, must be OFF (default)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 32 33

Sem comentários

Intel MPRTM4808 Manual do Utilizador Página 17