Intel LAN+Modem56 Manual do Utilizador

Intel EtherExpress™ PRO/100LAN+Modem56 PC CardUser’s GuideHow to Use This ManualThis Users Guide contains the latest information on the EtherExpressP

1-6 PRO/100 LAN+Modem PC Card User’s GuideNoteThe PRO/100 PC Card may feel hot to the touch, afterprolonged periods of normal use in some environment

4-62 PRO/100 LAN+Modem PC Card User’s GuideREM DEVICE=C:\CPQDOS\MS-FLASH.SYSThe above configuration uses only the drivers necessary for the Inteladap

Windows 3.x/MS-DOS Installation 4-63Gateway ColorBook seriesDEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-DFFFDEVICE=C:\CARDSOFT\SSCIRRUS.EXEDEVICE=C:\CARDOS

4-64 PRO/100 LAN+Modem PC Card User’s GuideThe above configuration will work with the PRO/100 PC Card driver atmemory location C8000.IBM ThinkPad 750

Windows 3.x/MS-DOS Installation 4-65The above configuration will work with the PRO/100 PC Card driver atmemory location D2000.Toshiba 19xx, 47xx, 48x

4-66 PRO/100 LAN+Modem PC Card User’s Guide

CHAPTER 5Utilities and ApplicationsThis chapter describes software utilities provided with the PRO/100 PCCard and provides configuration guidelines fo

5-2 PRO/100 LAN+Modem PC Card User’s GuideHow to Use Country IdentifierThe country identifier utility is automatically copied to your hard drive andla

Utilities and Applications 5-3Diagnostic Test Utility (M16BTEST.EXE)Intel provides a DOS-based self test diagnostics program. This program,located on

5-4 PRO/100 LAN+Modem PC Card User’s GuideMain ScreenThe program consists of several function buttons and a view pane.Pressing or invoking a functio

Utilities and Applications 5-5HARDWAREThis function attempts to determine if a PCMCIA controller exists on themachine. It first checks for PCI BIOS e

Hardware Installation 1-7CautionThe PRO/100 PC Card will not work with digital telephone linesor digital PABX systems. The adapter hardware will prot

5-6 PRO/100 LAN+Modem PC Card User’s GuideHow to Use the COM port monitorTo launch the COM port monitor, double-click on the the COM portmonitor icon

Utilities and Applications 5-7 CompuServe - WinCIM 2.5.1 with Internet Explorer 2.1 CompuServe - WinCIM v.3.02 with Windows 95 Laplink v.6.0 Lapl

5-8 PRO/100 LAN+Modem PC Card User’s GuideIf the communications program is already installed, you are installing anew modem, or your modem is not func

Utilities and Applications 5-9a In the C:\AOL30\MPM sub-directory,b Rename the CLASS73.MDM file to CLASS73.OLD andMODEM.INI file to MODEM.OLD.c Copy

5-10 PRO/100 LAN+Modem PC Card User’s Guidea Click Modem Setup in the Network & Modem Setup window.b In the Modem Selection and Customization wind

Utilities and Applications 5-112 Click Preferences.3 In the Connection window under Connection Type check allsettings for accuracy.a Winsock: (Defaul

5-12 PRO/100 LAN+Modem PC Card User’s Guidec Enable Port by clicking box in that field.3 Click Configure to configure the modem.a Select your modem Sp

Utilities and Applications 5-13EtherExpress PRO/100 LAN+Modem PC Card.d Verify that the entry in Services section matches the action youwish to exerc

5-14 PRO/100 LAN+Modem PC Card User’s GuideLotus cc:Mail Mobile version 2.22 with Windows 951 Copy the M16BLOT.MDM file to the default directory where

Utilities and Applications 5-154 Click User Preferences.5 Click the Ports icon.6 Under Communications Ports.a Select the appropriate protocol if conn

1-8 PRO/100 LAN+Modem PC Card User’s Guide Connecting to a Twisted Pair network.CautionFor safety reasons, do not interchange the telephone (RJ-11) a

5-16 PRO/100 LAN+Modem PC Card User’s Guidea Select the appropriate protocol if connecting via the networkb If connecting over the modem . Select the

Utilities and Applications 5-178 Modify the Dial-Up Adapter properties.a Double-click the My Computer icon on the desktop.b Double-click the Dial-Up

5-18 PRO/100 LAN+Modem PC Card User’s Guideg Select M16BNDIS.EXE Real Mode (for all Intel adapters), thenclick OKh Remove the IPX/SPX Compatible Trans

Utilities and Applications 5-19All. Windows disks #7 and 8 are required to complete theinstallationd In the Remote Access Configuration screen, Cli

5-20 PRO/100 LAN+Modem PC Card User’s Guide

CHAPTER 6Modem ReferenceThis chapter contains a comprehensive modem reference guide, includingresult codes and all AT commands and S-Registers support

6-2 PRO/100 LAN+Modem PC Card User’s GuideLong Short DescriptionCONNECT 75/1200 23 Connection at 75 (Tx)/1200 (Rx) bpsCONNECT 7200 24 Connection es

Modem Reference 6-3Long Short DescriptionCARRIER 75/1200 * Carrier detected 75 (Tx)/1200 (Rx) bpsCARRIER 1200 * Carrier detected at 1200bpsCARRIER 1

6-4 PRO/100 LAN+Modem PC Card User’s GuideAT Command ReferenceWith the exception of the Special Commands described at the beginningof the Command

Modem Reference 6-5AT Command ReferenceA AnswerTyping ATA causes the modem to go off-hook and respond to anincoming call by generating a carrier sign

CHAPTER 2Windows 95 InstallationWhich Version of Windows 95?Two Versions and Two Installation PathsCurrently two versions of Windows 95 are available:

6-6 PRO/100 LAN+Modem PC Card User’s GuideCn Carrier ControlThe ATCn command, where n is 1, guarantees backward compatibilitywith communications sof

Modem Reference 6-7Dial Modifiers (continued)S=n Dial a Stored Telephone NumberThe S modifier instructs the modem to dial a number that had beenprevi

6-8 PRO/100 LAN+Modem PC Card User’s GuideDial Modifiers (continued)@ Wait for Quiet AnswerThe @ modifier in a dial string instructs the modem to wa

Modem Reference 6-9Fn Online Data Character Echo commandThs ATFn command determines whether the modem will echo data fromthe DTE. This modem does not

6-10 PRO/100 LAN+Modem PC Card User’s GuideLn Monitor Speaker VolumeThe ATLn command, where n represents 0, 1, 2, or 3, is listed here forbackward c

Modem Reference 6-11O0 Instructs modem to leave online command mode andreturn to data mode (see +++ Escape Sequence underSpecial Commands)O1 This s

6-12 PRO/100 LAN+Modem PC Card User’s Guidebeginning of this chapter showing result codes in both long and shortformats..Type the command ATV or ATV

Modem Reference 6-13X0 Result codes 0-4 enabled. Busy detect and dial tonedetect disabled.X1 Result codes 0-5, and 10 enabled. Busy detect and dialto

6-14 PRO/100 LAN+Modem PC Card User’s Guide&B0 Disables the V.32 automatic retrain capability (notsupported).&B1 Enables the V.32 automatic

Modem Reference 6-15&Fn Load Factory SettingsThe AT&F command loads factory default parameters from ROM intothe active configuration profile,

2-2 PRO/100 LAN+Modem PC Card User’s Guide For Microsoft Windows 95 4.00.950b, follow the installationinstructions under the heading Windows 95 OSR2

6-16 PRO/100 LAN+Modem PC Card User’s Guide&Kn Local Flow Control OptionsThe AT&Kn command, where n represents 0-4, determines how the flowc

Modem Reference 6-17&Qn Asynchronous Communications Mode&Q0 Asynchronous mode, buffered (same as \N0)&Q1 Reserved&Q2 Reserved&Q3

6-18 PRO/100 LAN+Modem PC Card User’s Guide&V View Configuration ProfileThe AT&V command displays the contents of the active configurationpr

Modem Reference 6-19\Kn Break ControlThe AT\Kn command determines how the modem processes a Breaksignal received from the local DTE during a connecti

6-20 PRO/100 LAN+Modem PC Card User’s Guide\Tn Inactivity Timer LimitThe AT\Tn command specifies length of time (in minutes) that themodem waits bef

Modem Reference 6-21NoteSome countries do not permit calling tone to be disabled.+GCAPRequest Complete Capabilities ListSyntax: AT+GCAPAT+GCAP=?This

6-22 PRO/100 LAN+Modem PC Card User’s Guideported. To determine the current country setting, use AT+GCI? Thecommand will respond with the T.35 code

Modem Reference 6-23+GMIRequest Manufacturer IdentificationSyntax: AT+GMIAT+GMI=?This command displays one or more lines of information text, identif

6-24 PRO/100 LAN+Modem PC Card User’s Guide+MS=? Displays range of acceptable values for eachsubparameter<carrier> Specifies the preferred mod

Modem Reference 6-25<min_rate> Specifies the lowest bit rate at which themodem may establish a connection. (This valueis fixed at zero for the

Windows 95 Installation 2-3 Windows 95 troubleshooting information is provided in this chapterfollowing the installation sections.Recommended Install

6-26 PRO/100 LAN+Modem PC Card User’s GuideS-Registers because doing so could result in the modem behaving unpre-dictably.To display the value of an

Modem Reference 6-27S4 Response Formatting CharacterThis register contains the ASCII value of the line feed character.The factory default value is 10

6-28 PRO/100 LAN+Modem PC Card User’s GuideS8 Duration of Pause for Comma Dial Modi-fierThis register determines the number of seconds to pause for

Modem Reference 6-29by AT\Tn. Values are 0-255. Default is 0 (disabled).S34 DTE Throughput LimitThis register specifies whether the modem should limi

6-30 PRO/100 LAN+Modem PC Card User’s GuideS37=5 Attempt to connect at 1200bpsS37=6 Attempt to connect at 2400bpsS37=7 Attempt to connect at 4800bps

Modem Reference 6-31S46 Data Compression SelectionThe setting of this register is used to turn data compression on oroff. It is set by AT%Cn.Data com

6-32 PRO/100 LAN+Modem PC Card User’s GuideS91 Line Transmit LevelThis register is effective only for Japan. It specifies the line transmitlevel, in

APPENDIX AAutomated Customer SupportWorld Wide Web & Intel Bulletin BoardInternet FTP Service (BBS)Access Intel’s World Wide Web Use Intel’s BBS.

A-2 PRO/100 LAN+Modem PC Card User’s GuideIntel Web and Internet SitesSupport: http://support.intel.comNews: news://cs.intel.comNetwork Products: ht

APPENDIX BSpecificationsGeneral SpecificationsSize: 3.37 in x 2.13 in x 0.197 in (85.6 mm x54.0 mm x 5.0 mm)Weight: 1.47 oz (42.1 g)Temperature range:

2-4 PRO/100 LAN+Modem PC Card User’s Guidethe program. (For details on this utility, see Chapter 5. Utilities andApplications.)Windows 95 OSR2 Instal

B-2 PRO/100 LAN+Modem PC Card User’s GuideModem SpecificationsData modulation: V.34 from 33,600 down to 2400 bps,V.32terbo with trellis coding at 192

APPENDIX CLimited Lifetime WarrantyIntel warrants to the original owner that the hardware product deliveredin this package will be free from defects i

C-2 PRO/100 LAN+Modem PC Card User’s GuideIf the Customer Support Group verifies that the product is defective, they willhave the RMA department issu

APPENDIX DAgency NoticesFCC Compliance StatementFCC Rules and Regulations - Part 15This product has been tested and found to comply with the limits fo

D-2 PRO/100 LAN+Modem PC Card User’s GuideNOTEThis device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditio

Agency Notices D-3Canadian compliance (Industry Canada)When tested in at least one intended host:This digital apparatus does not exceed the Class B li

D-4 PRO/100 LAN+Modem PC Card User’s GuideManufacturer declarationThis certifies that Intel EtherExpress PRO/100 Mobile Adapterscomply with the EU D

APPENDIX ESoftware License AgreementBY USING THIS SOFTWARE, YOU ARE AGREEING TO BEBOUND BY THE TERMS OF THIS AGREEMENT. DO NOT USETHIS SOFTWARE UNTIL

E-2 PRO/100 LAN+Modem PC Card User’s GuideTRANSFER: You may transfer the Software to another party if thereceiving party agrees to the terms of this

Software License Agreement E-3U.S. GOVERNMENT RESTRICTED RIGHTS: The Software anddocumentation were developed at private expense and are providedwith

Windows 95 Installation 2-5Recommended Installation StepsInsertion, Detection, and Prompt for Disk1 With the computer powered-up and Windows 95 runnin

E-4 PRO/100 LAN+Modem PC Card User’s Guide

IndexSymbols100Base-TX Ethernet 1-410Base-T Ethernet network 1-456Kbpsconnections 1-1technology 1-1AAdvanced Look-ahead Pipelining 4-45Alphabetical r

Index-2COM portautomatic detection 4-33setting with COMx 4-33COM Port Monitor 5-5COMBASE keyword 4-35, 4-43, 4-48, 4-57COMIRQ keyword 4-35, 4-43, 4-48

Index-3FTP LANWatchinstallation 4-9NDIS driver 4-10Packet driver 4-10FTP PC/TCP 4-11and NetWare 4-15installation 4-11Packet driver 4-14GGeneric instal

Index-4Installation Program 1-2, 4-3Intel Web and Internet Sites B-2INTERRUPT keyword 4-44, 4-48INTERRUPTNUMBER keyword 4-44IOADDRESS keyword 4-44IOBA

Index-5Windows for Workgroups. See Windows for WorkgroupsMicrosoft LAN Managerinstallation 4-20Microsoft Remote Access Server (RAS) 5-17Microsoft Win

Index-6NetWare. See Novell NetWareinstallation with Windows 95 2-8Networkdrivers 4-3operating system 1-2, 4-3network node address 5-4NETX shell suppor

Index-7PC-NFS 4-27PC/TCP, FTP 4-11PCMCIA 1-2PORT keyword 4-46Power management 1-3Power-saving modesunder Windows 95 2-9Prodigy 5-19PROTOCOL.INI file 4

Index-8UUngermann-Bass Net/Oneinstallation 4-28Update Device Driver Wizard 2-5Utilities 5-1VVersionWindows 95 2-1VINES, Banyan 4-5VLM file decompressi

2-6 PRO/100 LAN+Modem PC Card User’s GuideCopying Intel Files5 At the Insert Disk screen, clickOK.6 At the Copying Files... screen, specify A:\ in th

Windows 95 Installation 2-77 Windows 95 will detect new hardware and copy files. At the InsertDisk screen, click OK.8 At the Copying Files... screen,

ii PRO/100 LAN+Modem PC Card User's GuideCopyright © 1997 Intel Corporation. All rights reserved.Intel Corporation5200 N.E. Elam Young ParkwayH

2-8 PRO/100 LAN+Modem PC Card User’s GuideHow to Install for Windows 95 and NetWare1 Install the PRO/100 PC Card driver and verify the installation a

Windows 95 Installation 2-9These utilities are automatically copied to your hard drive during installa-tion under Windows 95, and icons for the utilit

2-10 PRO/100 LAN+Modem PC Card User’s Guide For Windows 95 OSR2 (OEM Version), expand the itemModem.4 For either version, select Intel EtherExpress

Windows 95 Installation 2-111 Be sure you have the latest firmware anddriver.To determine what firmware and driver version you have, click MyComputer,

2-12 PRO/100 LAN+Modem PC Card User’s Guidethe PCMCIA icon in the Control Panel, so that Windows 95 will automati-cally detect the type of PCMCIA con

Windows 95 Installation 2-13Windows 95 Driver Parameters ReferenceCautionUnder most circumstances it will not be necessary to makemodifications direct

2-14 PRO/100 LAN+Modem PC Card User’s GuideThere are user-configurable parameters for the M16B.SYS driver that canbe modified using the Network Contr

Windows 95 Installation 2-15CautionUnder most circumstances it will not be necessary to makemodifications directly to the registry. Incorrect settings

2-16 PRO/100 LAN+Modem PC Card User’s Guide

CHAPTER 3Windows NT InstallationWhich Version of Windows NT?Two Versions and Two Installation PathsInstallation of the PRO/100 PC Card is different fo

ContentsHardware Installation ... 1-1Software Supplied ...

3-2 PRO/100 LAN+Modem PC Card User’s GuideHow Can I Tell Which Version and ServicePack I Have? If you don't know what version you have, follow

Windows NT Installation 3-3Windows NT 4.0 InstallationInstalling the PRO/100 PC Card under Windows NT 4.0 requiresinstalling the network driver and th

3-4 PRO/100 LAN+Modem PC Card User’s Guide7 Select the Adapters tab and click Add.8 On the Select Network Adapters screen, click Have Disk. InsertInt

Windows NT Installation 3-515 The country identifier utility will be autmatically launched. At thecountry identifier utility screen, make the appropri

3-6 PRO/100 LAN+Modem PC Card User’s Guide9a For Windows NT 3.51 with Service Pack 5 or greater, specify:\A:9b For all other versions of Windows NT 3

Windows NT Installation 3-7Power-Saving ModesThe PRO/100 PC Card has two power-saving modes to reduce adapterpower consumption under certain condition

3-8 PRO/100 LAN+Modem PC Card User’s GuideWindows NT Driver Parameters ReferenceM16B.SYS (NDIS 3) Settings for Microsoft Windows NTM16B.SYS is an NDI

Windows NT Installation 3-9Parameter Default Valid Values Registry ValueDIRECT ENABLE DISABLED DISABLED 0ENABLED 1EARLY TRANSMIT ENABLED DISABLED 0ENA

3-10 PRO/100 LAN+Modem PC Card User’s GuideThe registry parameters are as follows:Keyword Default Valid ValuesBUSNUMBER 0BUSTYPE 0X1DIRECTENABLE 0 0-

CHAPTER 4Windows 3.x/DOS InstallationThis chapter contains comprehensive information on how to install andconfigure the PRO/100 PC Card for systems ru

iv PRO/100 LAN+Modem PC Card User's GuideWindows 3.x Troubleshooting... 4-51Computer-Specific Appl

4-2 PRO/100 LAN+Modem PC Card User’s GuideInstallation under MS-DOSFor systems running MS-DOS without Windows, see Manual Installa-tion in the Alp

Windows 3.x/MS-DOS Installation 4-3Installation of Other Network Operating SystemsFor listed network operating systems other than Novell NetWare,high

4-4 PRO/100 LAN+Modem PC Card User’s GuideThe PRO/100 PC Card supports ODI, NDIS (version 2.01) and packetdrivers under Windows 3.x. To determine whi

Windows 3.x/MS-DOS Installation 4-5Banyan VINES version 5.5NDIS 2.0 DriverPrior to installing the Banyan Vines client software, it is necessary todet

4-6 PRO/100 LAN+Modem PC Card User’s Guide9 At the PROTOCOL.INI bindings prompt, type INTELNET.10 Press F10 to save and Esc to return to the main men

Windows 3.x/MS-DOS Installation 4-7Now continue with the DEC PATHWORKS installation as follows:1 In Windows 3.x run the Intel Installation Program fr

4-8 PRO/100 LAN+Modem PC Card User’s GuideNDIS DRIVER FILE: M16BNDIS.EXENDIS DRIVER NAME: INTEL$b. for PATHWORKS 5.1:DRIVER FILE: A:\M16BNDIS.EXEPROT

Windows 3.x/MS-DOS Installation 4-922 In LAN Manager System Service Connection Information window,enter username and press Enter.23 Enter the Windows

4-10 PRO/100 LAN+Modem PC Card User’s Guide2 Choose FTP LANWatch from the Select Network OperatingSystem screen.3 Follow the prompts to complete the

Windows 3.x/MS-DOS Installation 4-11DEVICE = C:\LW\IFCUST.SYS6 Create a directory called NDIS on your hard disk, by typing:MD NDIS7 At the DOS prompt

CHAPTER 1Hardware InstallationIntroductionThe PRO/100 PC Card is the ideal high-speed, multifunction solution forportable PC users. It supports 10 and

4-12 PRO/100 LAN+Modem PC Card User’s Guide5 Follow the prompts to the Network Card Screen, then select OtherNDIS Driver or Updated Packet Driver.6

Windows 3.x/MS-DOS Installation 4-13FTP PC/TCP 3.X with OnNet 1.1 with Windows 3.11 Run the Installation Program from Intel Disk 1, Installation Disk

4-14 PRO/100 LAN+Modem PC Card User’s Guide14 Copy the file ODIPKT from disk 5 of the FTP PC/TCP installationdisks to the directory into which PC/TCP

Windows 3.x/MS-DOS Installation 4-1512 Continue your server or workstation startup as instructed in thePC/TCP documentation.ODI with FTP Software PC/

4-16 PRO/100 LAN+Modem PC Card User’s GuideGeneric InstallationIf your network operating system is not listed in the Intel InstallationProgram, you c

Windows 3.x/MS-DOS Installation 4-178 Press Esc twice to bypass error messages.9 Continue with the installation until finished.10 Use a text editor t

4-18 PRO/100 LAN+Modem PC Card User’s Guide10 Use a text editor to replace the line in your CONFIG.SYS file thatreads:DEVICE=\XX.DOSwith the lineDEVI

Windows 3.x/MS-DOS Installation 4-192 Reboot the PC.3 Install IBM PC LAN or IBM DOS LAN Requester according to theinstructions in the IBM documentati

4-20 PRO/100 LAN+Modem PC Card User’s GuideMicrosoft LAN ManagerMicrosoft LAN Manager (version 2.1)NDIS 2.0 Driver1 Run the Installation Program from

Windows 3.x/MS-DOS Installation 4-215 Follow the prompts to complete the Intel segment of the installa-tion.6 Start Windows and, in the Network progr

1-2 PRO/100 LAN+Modem PC Card User’s GuideWith K56flex technology, current country-specific regulations may limitdownload speeds. Additional factors

4-22 PRO/100 LAN+Modem PC Card User’s GuideThe following topics are covered for Windows for Workgroups: How to install for Windows for Workgroups ve

Windows 3.x/MS-DOS Installation 4-23Windows for Workgroups Setup will also attempt to determine whatNetWare driver model you are using. If for some r

4-24 PRO/100 LAN+Modem PC Card User’s GuideAdd the following command to the AUTOEXEC.BAT file,where \WINDOWS is the directory into which MicrosoftWin

Windows 3.x/MS-DOS Installation 4-25How to Remove an Existing Windows for WorkgroupsInstallation1 Start Windows and select Network Setup in the Netwo

4-26 PRO/100 LAN+Modem PC Card User’s GuideNovell NetWareODI DriverThe Intel ODI driver allows for the concurrent use of Novell NetWareand other prot

Windows 3.x/MS-DOS Installation 4-27SunSoft PC-NFS (version 3.5)NDIS 2.0 Driver1 Run the Intel Installation Program from the Installation Disk.2 Choo

4-28 PRO/100 LAN+Modem PC Card User’s GuideDEVICE=C:\LANMAN\M16BNDIS.EXEbetween the two linesDEVICE=C:\LANMAN\PROTMAN.SYSDEVICE=C:\LANMAN\NFS-NDIS.SY

Windows 3.x/MS-DOS Installation 4-295 Continue with the installation until it is completed.6 Following the UB instructions, modify your CONFIG.SYS fi

4-30 PRO/100 LAN+Modem PC Card User’s Guide3 Follow the prompts to complete the Intel segment of the installa-tion.4 Install PathWay Access for DOS K

Windows 3.x/MS-DOS Installation 4-31from the Intel Network Drivers Disk to the PATHWAY directoryon your hard disk or boot disk. (The files are LSL.CO

Hardware Installation 1-3HotSwapThis card supports HotSwap on a PC Card computer that is runningMicrosoft Windows 95 or Windows 3.x/MS-DOS using Card

4-32 PRO/100 LAN+Modem PC Card User’s GuideUsing Network or ModemCommunications under Windows 3.xAll Intel Windows 3.x network drivers initialize bot

Windows 3.x/MS-DOS Installation 4-33COM Ports, IRQs, and I/O Base AddressesAutomatic COM Port DetectionThe PRO/100 PC Card drivers will automatically

4-34 PRO/100 LAN+Modem PC Card User’s Guidetion to activate serial port emulation. The COMx keyword can also bestated on the command line with the mo

Windows 3.x/MS-DOS Installation 4-35Changing Interrupt or I/O Address SettingsThe COMIRQ keyword is used to override the predefined interrupt valuefo

4-36 PRO/100 LAN+Modem PC Card User’s GuideHere are some examples of MEMORY keyword settings and the corre-sponding 8K exclusion:Configuration Keywor

Windows 3.x/MS-DOS Installation 4-37do not need IMENABLE.COM because the network drivers also initializethe modem.)Reboot the computer and run IMENAB

4-38 PRO/100 LAN+Modem PC Card User’s GuideODI Settings (for driver M16BODI.COM)Custom parameters for networks using the ODI driver can be enteredman

Windows 3.x/MS-DOS Installation 4-39M16BODI.COM KeywordsKEYWORD DEFAULT VALID VALUESCOMX AUTO (X = 1, 2, 3, OR 4)COMIRQ= AUTO (3 TO 15)COMBASE= AUTO

4-40 PRO/100 LAN+Modem PC Card User’s GuideNDIS 2.0.1 Settings (for driverM16BNDIS.EXE)Custom parameters for the NDIS driver can be entered manually,

Windows 3.x/MS-DOS Installation 4-41NDIS 2.0.1 Keywords (M16BNDIS.EXE)KEYWORD DEFAULT VALID VALUESCOMX AUTO (X = 1, 2, 3, OR 4)COMIRQ= AUTO (3 TO 15)

1-4 PRO/100 LAN+Modem PC Card User’s GuidePackage Contents EtherExpress PRO/100 LAN+Modem PC Card PC Card (ModelMBLA1656) Model MBLA-1656: Etherne

4-42 PRO/100 LAN+Modem PC Card User’s GuideRefer to your network documentation for instructions on how to installthe packet driver with your network.

Windows 3.x/MS-DOS Installation 4-43If nondefault configuration settings are used, these must be stated on theM16BPD.COM command line. For example,M1

4-44 PRO/100 LAN+Modem PC Card User’s GuideFRAME (ODI) designates support for multiple Ethernetframe types. One or more types can be used. Referto yo

Windows 3.x/MS-DOS Installation 4-45MEMORY specifies the memory location to use. It is specifiedin hexadecimal notation and is not a segmentvalue. Sp

4-46 PRO/100 LAN+Modem PC Card User’s GuideNOEARLYTX disables early transmit features of the PRO/100PC Card. Try using this keyword if you areexperie

Windows 3.x/MS-DOS Installation 4-47Error Messages for Windows 3.x andMS-DOS driversExcept as noted, these messages are specific to the PRO/100 PC Ca

4-48 PRO/100 LAN+Modem PC Card User’s GuideThe card is unreadable, possible memory conflictThe Card Information Structure (CIS) of the PC Card was un

Windows 3.x/MS-DOS Installation 4-49Please specify a hexadecimal number for the IOADDRESS keywordThis message applies only to the NDIS 2.0 Driver. Th

4-50 PRO/100 LAN+Modem PC Card User’s GuideThe I/O test failed - Please select a different I/O addressThe driver failed the I/O test. Try a different

Windows 3.x/MS-DOS Installation 4-51The selected COM port already existsThe COM port is already in use by another device. Assign a different I/Oport

Hardware Installation 1-54 For modem operations: an analog telephone line or PABXconnection (RJ-11), and if needed, an RJ-11 adapter for the localtel

4-52 PRO/100 LAN+Modem PC Card User’s GuideAfter the driver has been successfully loaded, the memory exclusion maybe reduced through trial and error

Windows 3.x/MS-DOS Installation 4-53The AUTODRV.INI file is used to assign resources to the PRO/100 PCCard. The AUTODRV.INI file should be edited to

4-54 PRO/100 LAN+Modem PC Card User’s Guidethe resources assigned by the LAN1xxxxxx keywords in the CARDID.INIfile. The LAN1MEMORYBASE2 entry can be

Windows 3.x/MS-DOS Installation 4-55Type File Name Configuration MethodODI M16BODI.COM reads NET.CFG configuration fileNDIS2 M16BNDIS.EXE reads PROTO

4-56 PRO/100 LAN+Modem PC Card User’s GuideIf none of the above settings allows the driver to load, it may be necessaryto add an IOWAITSTATES=2 and M

Windows 3.x/MS-DOS Installation 4-57The driver loaded, but my DOS modemsoftware won’t workThe PRO/100 PC Card is configured to add a second interrupt

4-58 PRO/100 LAN+Modem PC Card User’s Guidemodem driver (IMENABLE). If they do not match, either there aremultiple COMx keywords listed in the file o

Windows 3.x/MS-DOS Installation 4-593 Turn computer power off and then on again (cold boot).4 Start the Windows Terminal program in the Accessories g

4-60 PRO/100 LAN+Modem PC Card User’s GuideI can't hear the modemA. Be sure the computer speaker is enabled in the computers CMOSsetup utility.

Windows 3.x/MS-DOS Installation 4-61REM DEVICE=C:\PCM3\DBLFALSH.EXEREM DEVICE=C:\PCM3\MS-FLASH.SYSThe configuration above will work with the PRO/100