Intel KM4AM Manual do Utilizador Página 1

iG52-M6734XDMS-6734 (v1.X) M-ATX MainboardKM4M/KM4AM Series

1-4 MS-6734 M-ATX MainboardMainboard LayoutMS-6734 v1.X M-ATX MainboardSOCKET 462AGP SlotTop : mo use Bottom: keyboardT:1394 port (Optional)B:USB port

2-1Hardware SetupThis chapter tells you how to install the CPU, memory modules, andexpansion cards, as well as how to setup the jumpers on the mainboa

2-2 MS-6734 M-ATX MainboardQuick Components GuideJBAT1, p.2-22JSP1, p.2-21DDR DIMMs,p.2-7CPU, p.2-3 CPUFA1, p.2-15FDD1, p.2-15SYSFA1, p.2-15IDE1,IDE2,

2-3Hardware SetupCentral Processing Unit: CPUThe mainboard supports AMD® Athlon™, Athlon™ XP and Duron™ processors in the462 pin package. The mainboar

2-4 MS-6734 M-ATX Mainboard1. Please turn off the power andunplug the power cord beforeinstalling the CPU.2. Pull the lever sideways awayfrom the sock

2-5Hardware SetupInstalling AMD Athlon CPU (Socket 462) Cooler SetApply some heatsink pasteMSI Reminds You...Please apply some heat sink paste on top

2-6 MS-6734 M-ATX MainboardCPU Clock Frequency Selection through BIOSThe hardware configuration for CPU clock frequency of the motherboard is set to10

2-7Hardware SetupMemoryThe mainboard provides 2 slots for 184-pin DDR SDRAM DIMM (Double In-Line MemoryModule) modules and supports the memory size up

2-8 MS-6734 M-ATX MainboardDIMM Module CombinationInstall at least one DIMM module on the slots. You can install either single- or double-sided modul

2-9Hardware SetupPower SupplyThe mainboard supports ATX power supply for the power system. Before insertingthe power supply connector, always make su

iiManual Rev: 1.5Release Date: July 2004FCC-B Radio Frequency Interference StatementThis equipment has been tested and found to comply with the limits

2-10 MS-6734 M-ATX MainboardThe back panel provides the following connectors:Back PanelMouse ConnectorThe mainboard provides a standard PS/2® mouse mi

2-11Hardware SetupKeyboard ConnectorThe mainboard provides a standard PS/2® keyboard mini DIN connector for attachinga PS/2® keyboard. You can plug a

2-12 MS-6734 M-ATX MainboardIEEE1394 Port (Optional)The back panel provides one standard IEEE 1394 port. The standard IEEE1394 portconnects to IEEE139

2-13Hardware SetupRJ-45 LAN Jack (Optional)The mainboard provides a RJ-45 connector that allows your computer to be con-nected to a network environmen

2-14 MS-6734 M-ATX MainboardParallel Port Connector: LPT1The mainboard provides a 25-pin female centronic connector as LPT. A parallel portis a stand

2-15Hardware SetupThe mainboard provides connectors to connect to FDD, IDE HDD, case, LAN, USBPorts and CPU/System FAN.Floppy Disk Drive Connector: FD

2-16 MS-6734 M-ATX MainboardHard Disk Connectors: IDE1 & IDE2The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/133 controllertha

2-17Hardware SetupSerial ATA Connectors controlled by VT8237: SATA1 & SATA2 (forKM4AM only)The Southbridge of the KM4AM mainboard is VIA VT8237 wh

2-18 MS-6734 M-ATX MainboardFront Panel Connectors: JFP1 & JFP2The mainboard provides two front panel connectors for electrical connection to thef

2-19Hardware SetupFront USB Connectors: JUSB2 & JUSB3 (JUSB3 is optional)The mainboard provides one standard USB 2.0 pin headers JUSB2 and one opt

iiiCopyright NoticeThe material in this document is the intellectual property of MICRO-STARINTERNATIONAL. We take every care in the preparation of thi

2-20 MS-6734 M-ATX MainboardIEEE 1394 Connectors: J1394_1 & J1394_2 (Optional)The mainboard provides one or two optional 1394 pin headers J1394_1

2-21Hardware SetupConnected to JSP1SPDIF Bracket (optional)Front Panel Audio Connector: JAUD1The JAUD1 front panel audio connector allows you to conne

2-22 MS-6734 M-ATX MainboardCPU Frequency Jumpers: SW1 & SW2These two jumpers provide 100MHz, 133MHz, 166MHz, and 200MHz Front Side Busfrequency

2-23Hardware SetupSlotsAGP (Accelerated Graphics Port) SlotThe AGP slot allows you to insert the AGP graphics card. AGP is an interfacespecification

3-1BIOS SetupChapter 3. BIOS SetupThis chapter provides information on the BIOS Setup program and allowsyou to configure the system for optimum use.Y

3-2 MS-6734 M-ATX MainboardEntering SetupPower on the computer and the system will start POST (Power On Self Test) process.When the message below appe

3-3BIOS SetupThe Main MenuStandard CMOS FeaturesUse this menu for basic system configurations, such as time, date etc.Advanced BIOS FeaturesUse this m

3-4 MS-6734 M-ATX MainboardFrequency/Voltage ControlUse this menu to specify your settings for frequency/voltage control.Load Fail-Safe DefaultsUse th

3-5BIOS SetupStandard CMOS FeaturesDateThis allows you to set the system to the date that you want (usually the current date). The format is <day&g

3-6 MS-6734 M-ATX MainboardIf you select Manual, related information is asked to be entered to the following items.Enter the information directly from

iv1. Always read the safety instructions carefully.2. Keep this User’s Manual for future reference.3. Keep this equipment away from humidity.4. Lay th

3-7BIOS SetupAdvanced BIOS FeaturesQuick BootSetting the item to Enabled allows the system to boot within 5 seconds since it willskip some check items

3-8 MS-6734 M-ATX MainboardCPU Internal CacheThe item allows you to turn on or off CPU’s internal (L1) cache. Settings: Enabledand Disabled.CPU L2 Cac

3-9BIOS SetupAPIC ModeThis field is used to enable or disable the APIC (Advanced Programmable InterruptController). Due to compliance with PC2001 desi

3-10 MS-6734 M-ATX MainboardAdvanced Chipset FeaturesDRAM Clock/Drive ControlPress <Enter> and the following sub-menu appears.Current FSB / DRAM

3-11BIOS SetupDRAM CAS LatencyWhen synchronous DRAM is installed, the number of clock cycles of CAS latencydepends on the DRAM timing. The settings ar

3-12 MS-6734 M-ATX MainboardAGP & P2P Bridge ControlPress <Enter> and the following sub-menu appears.AGP Aperture SizeThis setting controls

3-13BIOS SetupIntegrated PeripheralsOnboard 1394 ChipThis setting is used to enable/disable the onboard IEEE 1394 controller. Settingoptions: Disable

3-14 MS-6734 M-ATX MainboardPrimary/Secondary Master/Slave PIOThe four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) foreach o

3-15BIOS SetupUSB Legacy Keyboard/MS SupportSelect Enabled if you need to use a keyboard/mouse in the operating system. Settingoptions: Enabled, Disab

3-16 MS-6734 M-ATX Mainboardon the screen: “EPP Mode Select.” At this time either EPP 1.7 spec or EPP 1.9 speccan be chosen.ECP Mode Use DMAThe ECP mo

vCONTENTSFCC-B Radio Frequency Interference Statement ... iiCopyright Notice ...

3-17BIOS SetupPower Management SetupIPCA FunctionThis item is to activate the ACPI (Advanced Configuration and Power ManagementInterface) function. If

3-18 MS-6734 M-ATX MainboardHDD Power DownIf HDD activity is not detected for the length of time specified in this field, the hard diskdrive will be p

3-19BIOS SetupPS2KB Wakeup SelectThe item specify how the system will be awakened from power saving mode wheninput signal of the keyboard is detected.

3-20 MS-6734 M-ATX MainboardDate(of Month) AlarmThe field specifies the date for Resume By RTC Alarm. Settings: 0~31.Time(hh:mm:ss) AlarmThe field sp

3-21BIOS SetupPNP/PCI ConfigurationsThis section describes configuring the PCI bus system and PnP (Plug & Play) feature.PCI, or Peripheral Compone

3-22 MS-6734 M-ATX MainboardPCI/VGA Palette SnoopWhen set to Enabled, multiple VGA devices operating on different buses can handledata from the CPU on

3-23BIOS SetupPC Health StatusThis section shows the status of your CPU, fan, overall system status, etc. Monitorfunction is available only if there

3-24 MS-6734 M-ATX MainboardUse this menu to specify your settings for frequency/voltage control.Frequency/Voltage ControlAuto Detect DIMM/PCI ClkThis

3-25BIOS SetupLoad Fail-Safe/Optimized DefaultsThe two options on the main menu allow users to restore all of the BIOS settings tothe default Fail-Saf

3-26 MS-6734 M-ATX MainboardWhen you select this function, a message as below will appear on the screen:Type the password, up to eight characters in l

viSerial ATA Connectors controlled by VT8237: SATA1 & SATA2 (for KM4AM only) ...

VIA VT8237 Serial ATA RAID Introduction4-1Chapter 4. VIA VT8237 SerialATA RAID IntroductionAppendix. Using 4- or 6-ChannelAudio FunctionThe Southbridg

MS-6734 M-ATX Mainboard4-2This section gives a brief introduction on the RAID-related background knowledgeand a brief introduction on VIA SATA RAID Ho

VIA VT8237 Serial ATA RAID Introduction4-3BIOS ConfigurationWhen the system powers on during the POST (Power-On Self Test) process, press<Tab> k

MS-6734 M-ATX Mainboard4-4Create Disk ArrayUse the up and down arrow keys to select the Create Array command and press<Enter>.Select Array Mode

VIA VT8237 Serial ATA RAID Introduction4-5If user selects a RAID 0 array in step 2, the block size of the array can also beselected. Use the arrow ke

MS-6734 M-ATX Mainboard4-6Delete Disk ArrayA RAID can be deleted after it has been created. To delete a RAID, use the followingsteps:1. Select Delete

VIA VT8237 Serial ATA RAID Introduction4-7Create and Delete Spare Hard DriveIf a RAID 1 array is created and there are drives that do not belong to ot

MS-6734 M-ATX Mainboard4-8Rebuild Broken RAID 1 ArrayWhen booting up the system, BIOS will detect if any member disk drives of RAID hasfailed or is ab

VIA VT8237 Serial ATA RAID Introduction4-91. Power off and Check the Failed Drive:This item turns off the computer and replaces the failed hard drive

MS-6734 M-ATX Mainboard4-10Install Driver in Windows OSh New Windows OS (2000/XP/NT4) Installation The following details the installation of the

1-1Getting StartedThank you for purchasing the KM4M / KM4AM (MS-6734 v1.x) Micro-ATX mainboard. The KM4M / KM4AM v1.x Micro-ATX mainboard isbased on V

VIA VT8237 Serial ATA RAID Introduction4-11Installation of VIA SATA RAID UtilityThe VIA SATA RAID Utility is the software package that enables high-pe

MS-6734 M-ATX Mainboard4-12Put a check mark in the check box to install the feature you want. Then click Nextbutton to proceed the installation.

VIA VT8237 Serial ATA RAID Introduction4-13Once the installation is complete, go to Start ---> Programs --->VIA --->raid_tool.exe to enable V

MS-6734 M-ATX Mainboard4-14Click on the plus (+) symbol next to Array 0---RAID 0 to see the details of each disk.Click on o r button to determine the

VIA VT8237 Serial ATA RAID Introduction4-15You may also use the same o r button to view the statuses of Array 0---RAID 1.Click on the plus (+) symbol

1-2 MS-6734 M-ATX MainboardMainboard SpecificationsCPUh Supports Socket A (Socket-462) for AMD® /Athlon™ XP /Sempron™ processorsh Supports AMD Athlon

1-3Getting Started- USB ports:VT8235 supports 6 USB ports (rear *4; front *2)VT8237 supports 8 USB ports (rear *4; front *4)- 1394 ports (Optional)Aud